8KG Power Bud Flowering Hydroponic Powder A&B

Flowering Nutrient 8kg - Great Two part Hydroponic nutrient for any fruiting or flowering plant. Easy step by step instructions. Amazing value for money! 
Can be used as a soil feed, halving the normal dosage.

Also available in 20 kg size.

Only the cleanest, contaminant-free raw materials are used to manufacture our products. This ensures the trouble free operation of dosing equipment, lessens the possibility of blocked emitters, and the best performance of your crop.Custom formulations are developed to suit your water supply, so often overlooked yet critical, including degree of hardness and elements present, type and stage of crop. This enables you the grower to minimise waste, with less frequent dumping and still maximise growth. And often you are able to use water supplies previously considered unsuitable. Generally mixes are batched and not blended in bulk to ensure consistency and make sure that every mix is true to formulation, giving great growing confidence.

NOTE:  Always add the A & B concentrate to water. Never mix the A & B without water first.

Basic instructions:

• Dissolve bag marked “A” into a 20L container = A solution. Add the powder, then add water to make 50L total.
• Dissolve bag marked “B” and trace element mix (brown powders) into a separate 20L container = B solution. Add the powder, then add water to make 50L total.
• This gives you two concentrate solutions.
• Add equal amounts of both “A” and “B” solutions to your main nutrient tank, until the desired EC (CF or PPM) strength is achieved.

Things to note:

• Adding 5mls of each “A and “B” solutions to every 1 litre of water (in main tank) should get you an approximate EC of 2.0
• If feeding into soil, add the nutrients into the main tank at half the rate, so 2.5mls of each “a” and “B”
• After dosing Nutrient adjust pH level to 5.9 – 6.3, this is the general range for most plant varieties.
• Change the Nutrients and Water in the MAIN tank every 3-4 weeks as a rough guide